ATEIS UAPg2 User Manual
Page 25
UAPG2 MANUAL
Version EN.24
25
UPDATE UAPG2 SOFTWARE AND FIRMWARE
PREPARATIONS
1. Get Recent Software from the WWW
You can download the most recent version of the UAPG2 software from our homepage
www.ateis-
international.com
click on “PRODUCTS” and select UAPG2 product. You will find all the downloadable
files related to the UAPG2. Download latest software version. (User: ateisint, password: ateisint)
2. Remove Older Version
Before you can upgrade or reinstall UAPG2 software you have to remove the older version from your
applications folder. To do this, follow the instructions below:
•
Choose:
> Start > Program files > ATEIS > UAPG2-G2 > UAPG2-G2 v1.x.x-(yyy)_Uninstall
•
Follow the instructions
You can also follow those steps:
•
Choose:
> Start > Settings > Control Panel
•
Double click the 'Add or Remove Programs' icon
•
Locate and choose 'ATEIS UAPG2-PPM v1.x.x' and click the 'Remove' button
•
Follow the instructions to remove the 'ATEIS UAPG2-PPM v1.x.x' software from your hard
drive
Install New Version
Proceed similar as stated in
software installation
chapter. Upgrading to a higher version sometimes
makes it necessary to upgrade the UAPG2’s MCU and DSP firmware also. Refer to the following
chapter to update firmware.
FIRMWARE UPDATE
Updating the UAPG2 software sometimes makes necessary to update the UAPG2's firmware also. To
do this, follow those steps:
•
Connect UAPG2 to your PC
•
Launch the UAPG2 software
•
Open the
Ethernet connection
•
Choose menu:
>Help > Version (See
Check UAPg2 version
)
If something is displayed in red:
•
Update firmware (see
Updating
)