ATEIS UAPg2 User Manual
Page 209
UAPG2 MANUAL
Version EN.24
209
VOX:
The gate is activated when the audio signal on the input is above the threshold. (Choose the
threshold with knobs on the bottom).
Only the highest priority channel of the activated channels will be routed to the output.
Contact:
The gate of the channel is activated when the "TTL In button" is activated. There is several
ways to activate this button. Right click on the "TTL In button", and choose what control this
button.
Only the highest priority channel of the activated channels will be routed to the output.
VOX + Contact:
The gate of the channel is activated when the audio signal on the input is above the
threshold, and if the "TTL In" button is activated.
Only the highest priority channel of the activated channels will be routed to the output.
Priority:
You can set a priority number for each channel. 1 is the biggest priority. When several channels are
active (gate open), only one of the channel with the biggest priority will be routed.
If you have several channels with the same priority, only the highest channel number will be routed
to the output.