ATEIS UAPg2 - Manual (Page 14)

UAPG2 MANUAL
Version EN.24
14
FOR YOUR SAFETY
Please follow the instructions in this chapter to get the optimum results from these units.
EXCLUSION OF RESPONSIBILITY
Manufacturer, importer, or dealer shall not be liable for any incidental damages including
personal injury or any other damages caused by improper use or operation of the UAPG2.
INTERFERENCE
Like all computing devices, the UAPG2 uses high frequency digital circuitry that may cause
interference on radio or television equipment placed close to the unit. The best solution for
problems like this is to relocate the affected parts.
WARNING
•
Do not expose the UAPG2 to extreme temperatures, direct sunlight, humidity, or dust, which
could cause fire or electrical shock hazard.
•
Keep away water or other liquids from the UAPG2. Otherwise fire or electrical shock may
result.
•
Connect the power cord only to an AC outlet of the type stated in this Owner's Manual or as
marked on the unit. Otherwise fire and electrical shock hazard results.
•
When disconnecting the power cord from an AC outlet always grab the plug. Never pull the
cord. A damaged power cord is a potential risk of fire and electrical shock hazard.
•
Avoid touching power plugs with wet hands. Doing so is a potential electrical shock hazard.
•
Take care for correct polarity when operating the UAPG2 from a DC power source. Reversed
polarity may cause damage to the unit or the batteries.
•
Avoid placing heavy objects on power cords. A damaged power cord is a fire and electrical
shock hazard.
•
Do not cut, scratch, bend, twist, pull, or heat the power cord. A damaged power cord is a fire
and electrical shock hazard. Ask your ATEÏS dealer for replacement.
•
Turn off the unit immediately, remove the power cord from the AC outlet and consult your
ATEÏS dealer in any of the following circumstances:
o Smoke, odour, or noise getting out of the unit.
o Foreign objects or liquids get inside the UAPG2.
o The unit has been dropped or the shell is damaged.
o The power cord is damaged.
If you continue using the UAPG2, fire and electrical shock may result.
•
Do not drop or insert metallic objects or flammable materials into the unit as this may result
in fire and electrical shock.
•
Do not remove the UAPG2 s cover, as there are exposed parts inside carrying high voltages
that may cause an electrical shock. Contact your ATEÏS dealer if internal inspection,
maintenance, or repair is necessary.
•
Do not try to make any modifications to the UAPG2. This is a potential fire and electrical
shock hazard.
•
Avoid the UAPG2’s ventilation slots to be blocked. Blocking the ventilation slots is a potential
fire hazard.