ATEIS UAPg2 - Manual (Page 206)

UAPG2 MANUAL
Version EN.24
206
DigiLink input and Digilink output
Create a virtual audio channel to send Audio through the Link protocol.
16 audio channels at 48 kHz are available from each UAP device to the next
linked UAP, and 5 audio channel at 96 kHz.
Send audio to the next UAP Receive audio from the previous UAP
Caution : The digilink component send the audio only to the next UAPg2 in the system (the first is
connected to the PC), as in the following draw.