ATEIS UAPg2 - Manual (Page 211)

UAPG2 MANUAL
Version EN.24
211
LPC
There are several types of LPCs, various numbers of inputs as well as
outputs.
All the PPM connected to an UAPg2 will be configured in the same LPC component.
Connect the component’s inputs to the virtual inputs of the UAPg2 where the PPMs are physically
connected, then connect outputs of the component to virtual outputs (you can add audio component
to adjust signal before and after the component: ducker, Eq, Mixer….).
Then in the component, select the right physique input of the PPM (to define key) in the PPM plug
on.
After that create your paging (notch which key route where…)
For more information please see " Create paging of PPM with LPC " chapter.