Adding a windows patch, Modifying a windows patch, Deleting a windows patch – H3C Technologies H3C Intelligent Management Center User Manual
Page 108
92
{
Patch Name—Enter the patch name.
{
Version—Enter the operating system version.
{
Language—Enter the language: ALL, Native Language, or English.
4.
Click Query.
5.
To reset query values and search results, and to restore the full patch list, click Reset.
Adding a Windows patch
1.
Click the User tab.
2.
From the navigation tree, select User Security Policy > Patch Control > Windows Patches.
The Windows Patches page appears.
3.
Click Add.
The Add Windows Patch Control page appears.
4.
Configure the basic information.
{
Patch Name—Enter the patch name (for example, KB2508429, KB2509553).
{
Message—Enter the prompt message. When the iNode client detects that the user endpoint
lacks the patch, it displays this message.
{
Patch Level—Select a patch priority level: Critical, Important, Moderate, or Low.
5.
Select an operating system version in the Applicable Windows Version area.
6.
Click OK.
Modifying a Windows patch
1.
Click the User tab.
2.
From the navigation tree, select User Security Policy > Patch Control > Windows Patches.
The Windows Patches page appears.
3.
Click the Modify icon
for the patch you want to modify.
4.
Modify the basic information for the patch. You cannot modify Patch Control Name or Service
Group.
5.
Select an operating system version in the Applicable Windows Version area.
To remove the Windows version, clear Operating System.
6.
Click OK.
Deleting a Windows patch
1.
Click the User tab.
2.
From the navigation tree, select User Security Policy > Patch Control > Windows Patches.
The Windows Patches page appears.
3.
Click the Delete icon
in the patch list for the target patch.
A confirmation dialog box appears.
4.
Click OK.