H3C Technologies H3C Intelligent Management Center User Manual
Page 299
283
a.
Click the Operator Group Information icon
to the right of Access Right, and the Operator
Group Information page appears.
b.
Select one or more operator groups in the Group Name area.
The operators that belong to the selected operator groups are displayed.
c.
Click Close to return to the page for adding a report.
5.
Specify the period for which a report will be generated.
A scheduled report period is determined by both the schedule type and schedule time settings.
{
Schedule Type—Select one of the following scheduling options: Daily, Weekly, Monthly,
Quarterly, Half Yearly, and Yearly.
{
Report Start Date—Click the field to select the start date or the report in a calendar.
6.
Set the time when a report becomes invalid and the EAD component no longer generates the
report.
Click the End by box. Enter an end time in the format YYYY-MM-DD hh:mm. You can also click the
field to select the end time in a calendar.
7.
From the Report File Format list, select a report file format.
Options are PDF, CSV, MSExcel, and MSExcel (Data-only).
8.
Send a report by email.
Click the Send by Email box, and enter the email address of the receiver. Reports can be sent to
one email address.
9.
Set the minimum CPU frequency (in MHz) and maximum CPU frequency (in MHz). The CPU report
collects statistics about assets whose CPU frequencies are between the minimum frequency and the
maximum frequency.
a.
Click the Set Parameter icon
for the Minimum Frequency.
b.
In the Parameter Value field, enter the minimum CPU frequency.
c.
Click OK to return to the page for adding a report.
The Set Parameter icon changes from
to .
d.
Click the Set Parameter icon
for the Maximum Frequency.
e.
In the Parameter Value field, enter the maximum CPU frequency.
f.
Click OK to return to the page for adding a report.
The Set Parameter icon changes from
to .
10.
Set the asset group.
The CPU report collects statistics about the CPU frequencies of all registered assets in the specified
asset group, including its subgroups.
a.
Click the Set Parameter icon
for the asset group.
b.
Select an asset group from the Parameter Value list.
The options are asset group names.
c.
Click OK to return to the page for adding a report.
The Set Parameter icon changes from
to .
11.
Click OK.