H3C Technologies H3C Intelligent Management Center - Manual (Page 237)

221
• Server Name—Name of the software deployment server.
• Deployment Method—Software deployment method: HTTP, FTP, or Share File.
When the deployment method is HTTP, the page also has the following parameter:
{
Port Number—Listening port of the HTTP server, 80 by default.
When the deployment method is FTP, the page also has the following parameters:
{
Port Number—Listening port of the FTP server, 21 by default.
{
Transmission Mode—FTP transfer mode to use when a firewall or NAT device exists between the
FTP server and the iNode client. The value can be PORT or PASV.
− PORT—When the FTP server is protected by a firewall or NAT device, select the PORT mode.
− PASV—When the iNode client is protected by a firewall or NAT device, select the PASV
mode.
{
Anonymous User—Indicates whether to allow anonymous login to the FTP server.
{
User Name—User name used to access the FTP server. This field appears only when
Anonymous User is set to No.
When the deployment method is Share File, the page also has the following parameters:
{
Anonymous User—Indicates whether to allow anonymous login to the file share server.
{
User Name—The user name used to access the file share server, in the format prefix\user ID. If
the software deployment server has been assigned to a domain, use the domain name as the
prefix. If not, use the computer name as the prefix. This parameter appears only when
Anonymous User is set to No.
• IP Address—IP address of the software deployment server.
Viewing the software deployment server settings list
1. Click the User tab.
2. From the navigation tree, select Desktop Asset Manager > Software Server Settings.
The software server setting list displays all software deployment server settings.
3. Click Refresh to refresh the software server setting list.
4. To sort the software server setting list, click the Server Name, Deployment Method, or IP Address
column label.
Viewing software deployment server settings details
1. Click the User tab.
2. From the navigation tree, select Desktop Asset Manager > Software Server Settings.
The software server setting list displays all software deployment server settings.
3. Click the name of the software deployment server to view detailed settings.
The Software Server Settings Details page appears.
4. Click Back to return to the software server setting list.
Adding software deployment server settings
1. Click the User tab.