H3C Technologies H3C Intelligent Management Center - Manual (Page 61)

45
• Source Port—Source port of IP packets. This field displays a value only when the transport-layer
protocol of the ACL rule is TCP or UDP (if you selected TCP or UDP in the Protocol list). Otherwise,
this field displays two hyphens (--).
The default setting is 0, which matches all source ports.
• Priority—Priority of the ACL rule. The ACL rules are arranged in descending priority order. An ACL
rule with a higher priority is preferentially matched. Click the Move Up icon
or Move Down icon
to adjust the list.
Viewing the client ACL list
1. Click the User tab.
2. From the navigation tree, select User Security Policy > Endpoint Access Control > Client ACL.
The Client ACL List displays all client ACLs.
3. Click Refresh to refresh the Client ACL List.
Viewing client ACL details
1. Click the User tab.
2. From the navigation tree, select User Security Policy > Endpoint Access Control > Client ACL.
The Client ACL List displays all client ACLs.
3. Click the name of a client ACL to view detailed information.
The View Client ACL page appears.
4. Click Back to return to the client ACL list.
Adding a client ACL
1. Click the User tab.
2. From the navigation tree, select User Security Policy > Endpoint Access Control > Client ACL.
The client ACL list displays all client ACLs.
3. Click Add.
The Add Client ACL page appears.
4. Configure basic information for the client ACL. The ACL name must be unique in EAD.
5. Click Add in the ACL Rule Information area.
The Add Client ACL Rule page appears.
6. Configure the ACL rule parameters and click OK.
The new ACL rule appears on the ACL Rule List.
Repeat step 5 and step 6 to add more ACL rules, as needed.
7. Adjust priorities for the ACL rules.
ACL rules are sorted in descending priority order. Click the Move Up icon
or Move Down icon
to change rule positions on the ACL Rule List.
8. Click OK.