H3C Technologies H3C Intelligent Management Center - Manual (Page 236)

220
10 Configuring software deployment
The software deployment function allows operators to batch deploy the same software product to
multiple assets.
Preparing to use the software deployment function
To use this function, complete the following tasks:
1. Set up a software deployment server, which can be an HTTP, FTP, or file share server. The server
must be properly configured to allow assets to download software.
2. Add the server settings to DAM, such as the IP address, port, and username/password.
3. Configure a software deploy task in DAM. The task settings include the software deployment
server, name and version of the software to be deployed, download path, installation mode, and
deployment target (individual assets or asset groups).
DAM sends the software deploy task to the iNode client for execution, and then the iNode client
downloads and installs software from the software deployment server as specified in the task.
Configuring software deployment server settings
DAM supports the following types of software deployment servers:
• HTTP
• FTP
• File share
Operators can add the server settings to DAM for management.
Software server settings list contents
• Server Name—Name of the software deployment server. Click the name to view detailed
information.
• Deployment Method—Software deployment method:
{
HTTP
{
FTP
{
Share File
• IP Address—IP address of the software deployment server.
• Modify—Click the Modify icon to modify the server settings.
• Delete—Click the Delete icon to delete the server settings.
Software deployment server settings details
The software deployment server settings details page has the following parameters: