H3C Technologies H3C Intelligent Management Center - Manual (Page 155)

139
Deleting the parent node
To remove the parent-child relationship between the current node and its parent node, perform the
following operations:
1. On the parent node, delete the current node as its child node.
2. On the current node, remove the parent node.
The current node no longer reports data to the parent node after the parent-child relationship is removed.
To delete the parent node for the current node:
1. Click the User tab.
2. From the navigation tree, select User Security Policy > Hierarchical Node.
The child node list displays all child nodes of the current node.
3. Click Delete Parent.
The Delete Parent page appears.
4. Click Delete.
Deploying services, security policies, and service
parameters
Hierarchical management offers automatic and manual deployment of services, security policies used by
the services, and EAD service parameters from a node to its child nodes. The node deploys the EAD
service parameters Data Reporting Time and Data Lifetime to its child nodes because they cannot be
configured on individual child nodes. A child node uses the deployed services and security policies for
identity authentication and security check.
With automatic deployment, a node checks the Policy Update Time for child nodes daily at the scheduled
deployment time. The node performs deployment when the Policy Update Time is later than the last
successful deployment time.
The policy update time is refreshed, as well as any changes to the service parameters, security policies,
and security check items.
Deployment contents
The contents of both automatic and manual deployment depend on the centralized policy management
status.
• When centralized policy management is enabled, automatic and manual deployment both deliver
services, security policies, and service parameters to the child nodes.
• When centralized policy management is disabled, automatic and manual deployment both deliver
only service parameters to the child nodes.
Specifying the services to be deployed to a child node
1. Click the User tab.
2. From the navigation tree, select User Security Policy > Hierarchical Node.