H3C Technologies H3C Intelligent Management Center - Manual (Page 118)

102
Viewing traffic control details
1. Click the User tab.
2. From the navigation tree, select User Security Policy > Traffic Control.
The traffic control list displays all traffic controls.
3. Click the name of the traffic control to view its information about it.
4. Click Back to return to the traffic control list.
Adding a traffic control
1. Click the User tab.
2. From the navigation tree, select User Security Policy > Traffic Control.
The traffic control list displays all traffic controls.
3. Click Add.
4. Configure the basic information.
5. Enter a Minor Threshold and Severe Threshold for each type of monitoring that must be enabled:
{
Monitor IP Traffic
{
Monitor Broadcast Packets
{
Monitor Packets
{
Monitor TCP/UDP Connections
6. Click OK.
The traffic control appears in the configuration options when you configure the security policy. For more
information, see " Managing security policies ."
Modifying a traffic control
1. Click the User tab.
2. From the navigation tree, select User Security Policy > Traffic Control.
The traffic control list displays all traffic controls.
3. Click the Modify icon for the target traffic control.
4. Modify the basic information. You cannot modify the name or service group.
5. Modify the parameters for each monitoring category of as needed (Monitor IP Traffic, Monitor
Broadcast Packets, Monitor Packets, and Monitor TCP/UDP Connections):
{
Select a monitoring category to disable it.
{
Unselect a monitoring category to enable it.
{
Modify each minor threshold or major threshold as needed.
6. Click OK.