Ricoh 2400L - Manual (Page 151)

Adjusting the Document Feeder
Depending on the thickness of the paper, three settings can be selected; thin,
normal, and thick.
1. Open the operation panel.
2. To meet the paper type to be scanned, adjust the lever position as shown in the
following table.
Paper Thickness Pressure Position
Thin Low 1
Normal Normal 2
Thick High 3
To correct document feed problems, adjust the lever position as shown in the
following.
Problem Position
Multi-feed Thin sheet 1
Multi-feed Thin sheet 3
Feed Jam 1
Non-feed 3
NOTE: In a new machine the setting is middle position.
1 2 3 SOL
V
IN
G
PROB
LE
MS
SOLVING PROBLEMS DOCUMENT JAMS
141