Ricoh 2400L - Manual (Page 896)

3 . Use the

and

arrows on the scroll key
to switch the feature on or off. This
mode is off if the display is shown as
opposite.


 



 
4. To store your setting: Yes.
Setting Your Machine’s Identification
There are three labels which identify yourself to the operator at the other end.
These labels are called the RTI, the TTI, and the CSI.
❐ RTI (Remote Terminal Identification) and CSI (Called Subscriber Identification):
These appear on the receiving fax machine in the display on the operation panel
during communication, and on reports after communication.
❐ TTI (Transmit Terminal Identification): This is printed at the other end at the top
of each page received from your machine.
You can see the RTI, TTI, and CSI of the other party during the communication
(see the following diagram) and on reports printed by the machine later.
Some machines may reject your transmitted fax messages if you have not stored
the RTI, TTI, or CSI in advance.
Note: You can switch the TTI off for a particular transmission if you do not wish it to
be printed on your pages as they are printed at the other end. See page 37.
TTI
RTI or CSI
I
NIT
IAL
SET
TI
NGS
APPENDIX SOME ITEMS MUST BE PROGRAMMED FIRST
205