Ricoh 2400L - Manual (Page 899)

1. Either:
❐ If you are starting the standby mode,
press Function, 6 2 2 2 2 6 1 and
Yes. And then press

until the
screen is as shown opposite. Finally
press Yes.


 

❐ If you have just entered the TTI in
the previous procedure, press Yes. 

#
2. Input your telephone number.
Example: 2125556789


#

$%&
Note: Not more than 20 digits.
❐ If you wish to input a "+" sign (common practice in Europe) using
Quick Dial 28 (Symbol).
3. Yes and Function.
Pulse Dial or Tone Dial
If the setting of this feature is incorrect, you will not be able to dial using the
machine’s keypad or automatic dialer.
There are two basic types of telephone company exchange:
❐ Exchanges using Tone Dialing (also known as touch tone, DTMF, TT, or
sometimes PB)
❐ Exchanges using Pulse Dialing (also known as rotaty dial, PD or DP)
The telephone line type setting in your fax machine must match the type of
exchange that you are connected to. If you are not sure what type your local
exchange is, ask the telephone company.
Note: If there is a handset connected to your fax machine, make sure that it is
also set up in the correct dialing mode.
Change the line type setting for the fax machine using Function 62.
1. Press Function 6 2 2 2 2 6 2 and Yes.
Make sure that the display is as shown
opposite


 

2. Press Yes.
PD = Pulse Dial, TT = Touch Tone. In
the above display, TT is currently se-
lected.

 


 
3. Change the setting by using


or

.
4. To finish, press Yes and Function.
SOME ITEMS MUST BE PROGRAMMED FIRST APPENDIX
208