Ricoh 2400L - Manual (Page 908)

Erasing a Speed Dial
1. Function 3 2 and Yes.  
 


 
2. Input the Speed Dial Code that you wish
to erase. Example: If you erase the
Speed Dial code 01; press 0 and 1
from the ten key pad.
❐
If the wrong number is displayed, use the

and  to scroll through the Speed Dial Codes
on the screen.
 
  
!" # 

3. Yes.  
 
4. No and Yes.  
  
After erasing a number, you can store a
new one to replace it.
If you do not wish to erase another Speed
Dial number, go to step 2 to continue or
press Function if you have finished.
Programming Group Dial
Groups allow you to combine some numbers into one group, for easy sequential
transmission to all the numbers in that group. These numbers can be selected
from those already stored in Quick Dial Keys or Speed Dial Codes, or you can
select other numbers by entering them at the keypad.
You can also store a label with each Group. This label will be displayed when you
select the Group.
Note: See page 22 to see how to dial a group.
The Group programming procedure has several modules. Entering Group
Programming mode will be explained first, followed by each of the modules.
Entering Group Programming Mode and Selecting a Group
1. Function 3 3 and Yes.   % 
 


  
2. Input the number of the group that you
wish to program.
    
I
NIT
IAL
SET
TI
NGS
APPENDIX QUICK DIAL, SPEED DIAL, AND GROUP DIAL
217