Ricoh 2400L - Manual (Page 646)

RTI (Remote Terminal Identification)
Your RTI appears on the other party’s operation panel during communication,
providing the other machine was made by the same manufacturer as yours. The
RTI can have up to 20 characters (numbers and letters can be used, along with
some punctuation marks). Program something easy to recognize, such as your
name, company name, or department name within the company.
1. Press Function 6 2 2 2 2 6 1 and Yes. Y/NEXTk
SET OWN NUMBER
2. Press
k
until the screen is as shown oppo-
site.
Y/NEXTk
SET RTI
3. Press Yes. RTI ABC
t t t t t t t t t t t t t t t t t t t t
4. Input the RTI using the Quick Dial key or
the ten keypad. (You can delete a char-
acter using Clear.)
Example: XYZ COMPANY
For how to program characters, see
page 166.
RTI ABC Y/N
XYZ COMPANYt t t t t t t t t
NOTE: The RTI cannot be not more
than 20 characters long.
5. Press Yes to program the RTI. You may
then enter the TTI by going to step 1 of
the following procedure.
TTI (Transmit Terminal Identification)
Your TTI is printed at the other end on the top edge of each page that you send.
The TTI can have up to 32 characters (numbers and letters can be used, along
with some punctuation marks). Program something easy to recognize, such as
your name, company name, or department name within the company.
INITIAL SETTINGS APPENDIX
190