Ricoh 2400L - Manual (Page 659)

2. Input the number of the group that you
wish to alter.
Example: If you want to delete or edit
the contents of the Group 1; press 1 on
the ten keypad. And press Yes.
GROUP 1 Y/N
PROGRAM QUICK?
3. Either:
❐ If you want to change the Quick
Dial key where that Group is
stored: Yes. GROUP 1 Y/N
n 08
Then press No and press a new
Quick Dial key. (NOTE: If that
Group is not programmed into a
Quick Dial key, you don’t have to
do it.) GROUP 1 Y/N
n 16
Then press Yes and go to step 4. GROUP 1 Y/N
PROGRAM LABEL?
❐ If you don’t want to program that
group into a Quick Dial key, press
No, then go to step 4. GROUP 1 Y/N
PROGRAM LABEL?
4. Either:
❐ If you want change the label, press
Yes.
Edit the label and press Yes. GROUP 1 ABC Y/N
DISTRIBUTORt t t t t t t t t
❐ If you want to keep this label, press
No. GROUP 1 DIAL/N
t t t t t t t t t t t t t t t t t t t t
5. Input a number that you wish to store in or
erase from the group.
Example:
Quick Dial 01: Quick Dial key 01.
Speed Dial 30: Speed Dial, 3 and 0 on
the ten keypad.
Full number: Enter it at the ten keypad.
GROUP 1 Y/N
SPEED 30
6. Yes.
If " ALREADY PROGRAMMED " appears,
either:
GROUP 1 DIAL/N
t t t t t t t t t t t t t t t t t t t t
❐ Keep the number: No.
❐ Erase the number Yes.
Go back to step 5.
7. Either:
❐ Store or erase another number: Go to
step 5.
❐ Finish: Function.
❐ To erase a group completely, you
must erase every telephone number
from the group individually, using
steps 5 and 6.
APP
E
NDIX
APPENDIX INITIAL SETTINGS
203