Ricoh 2400L - Manual (Page 661)

Storage Capacity for Telephone Numbers
When you use the three features listed in the following table, you can dial more
than one number. Some functions have different capacities.
COMMUNICATION
FEATURE
PAGE MAX. NUMBER OF
ADDRESSES/FAX
MESSAGE
TOTAL
FAXES TOTAL
ADDRESSES
FOR ALL
FAXES
MAX. STORED
Pages
Broadcasting 62 132
132
300
(Note: Any
fax number
can be used
for more than
one fax
message at
the same
time) Standard: 40
With 2M: 207
With 4M: 371
(
✬ 3)
Polling Reception
157 132
The following table shows how many telephone numbers you can store in the
machine.
Quick Dials 32
Speed Dials 50
Ten Keypad ( ✬ 1) 67
Groups ( ✬ 2) 7
✬ 1 This is the number of full telephone numbers that can be input into the
machine at any one time. For example, if there is a broadcasting operation in
memory using 66 full numbers, you can only input one more full number for
any operation, including storage in groups, until the broadcast has finished.
Also, if you have stored, say, 30 numbers at the ten keypad into your groups,
then you will only be able to input 37 full dial numbers at any one time for
other operations, such as broadcasting.
✬ 2 You can program up to 7 groups. Each group can contain up to 132 numbers.
You can store any Quick Dial or Speed Dial number in a group. You may also
store up to 67 numbers that are not programmed as Quick or Speed Dials;
see Note 1 above for the restrictions on the use of these numbers.
✬ 3 This is the theoretical maximum number of pages that can be stored.
APP
E
NDIX
APPENDIX INITIAL SETTINGS
205