Ricoh 2400L - Manual (Page 765)

Printing Your Personal Identification at the Other End
This feature supplements the TTI. It uses the Personal Code and the Quick Dial
or Speed Dial Label to inform the other party who is sending the message, and
state who the message is for.
To use this feature, you must:
❐ Switch Label Insertion on for each Quick Dial and Speed Dial that you wish to
use this feature with (see the procedures starting on pages 211 and 214).
❐ Program the Personal Codes of the machine’s users, and store their names
with their codes (see page 66).
❐ Program labels with the Speed Dial and Quick Dial numbers (see the
procedures starting on pages 211 and 214).
❐ When you make a transmission, use a Quick or Speed Dial, and select the
Personal Code option (see page 32).
Note: TTI off has effect on this feature.
Example:
In the above example, the message was sent using Johnson’s personal code.
The Quick Dial or Speed Dial used to dial the destination had MR SMITH as the
label.
Note: If you later reprogram the Speed/Quick Dial, be sure to reprogram or de-
lete the label as well.
The top of the image will be overprinted if there is no margin at the top of
the transmitted page (this is also true for the TTI.)
Cross-reference:
Quick Dial and Speed Dial: see page 209. Personal Codes: see pages 32 and 66.
Date and Time
To: MR SMITH
From the
Quick/Speed
Dial Label
TTI (32 characters)
From: JOHNSON
From the
Personal
Code
Your fax message as received at the other end
TRANSMISSION ADVANCED FEATURES
74