Ricoh 2400L - Manual (Page 821)

6. Press


to move the cursor under the
time.

'
 ∗ '
  ##
7. Input the time 0 9 0 0 from the ten key
pad.
To change AM to PM and the other
way around, press # . And press Yes.

'
 ∗ '
  #(##

8. Repeat from the step 5 for the second
timer. Press


to move the cursor under
the time.

'
 ∗ '

  ##
And input the time 0 6 0 0, for example,
from the ten key pad for the timer value
.
To change AM to PM and the other
way around, press # . And press Yes.
'
 ∗ '

  ###

KEEPING THE HEATER ON ALL DAY: Set both timers to ON = 12:00AM.
KEEPING THE HEATER OFF ALL DAY: Set both timers to OFF = 12:00AM.
9. Either:
❐ Program the timer for another day: Go back to step 3.
❐ Finish: Yes and Function.
Note: To print the received messages while the heater is off, press any key. Af-
ter all the messages have been printed, the heater will stay on for 5 min-
utes before switching off again. Because of this, the Night timer does not
give you complete security for received documents. For this type of secu-
rity, use the Memory Lock feature; see page 84.
Temporarily Switching the Heating Roller On
During the Night Timer cycle that the heating roller is off, it may be switched back
on:
❐ When you hold the Energy Saver key for a few seconds.
❐ When you insert a document in the feeder.
❐ When you pick up the handset, or press On Hook Dial key.
After you leave the machine alone for a while, the heating elements will turn back
off. Note that if the automatic saver mode is disabled by a service technician, the
night timer will not turn back on.
OTHER ADVANCED FEATURES
130