Ricoh 2400L - Manual (Page 267)

F
If you want to program a label for this Group: Press Yes and go to step 7.
F
If you do not wish to program the label: Press No and go to step 9.
7.Input a label using the Quick Dial keys
and the ten key pad (such as DISTRIBU-
TORS).
GROUP 1 ABC /Y/N
DISTRIBUTORSt t t t t t t t
8. Yes. GROUP 1 DIAL/N
t t t t t t t t t t t t t t t t t t t t
9. Input the number that you wish to store in
the group. For example:
Quick Dial 25: Press the 25 of the ten
key pad.
GROUP 1 Y/N
n 25
Speed Dial 00: Speed Dial key and then
0 and 0 from the ten key pad.
GROUP 1 Y/N
N 00
Full number: Input at the keypad on the
operation panel.
GROUP 1 Y/N
00144215842261
10. Yes
If "ALREADY PROGRAMMED" ap-
pears, either;
GROUP 1 DIAL/N
t t t t t t t t t t t t t t t t t t t t
F
Keep the number: No
F
Erase the number : Yes
NOTE: Do not store more than 132 numbers in a Group.
11. Either:
F
Input another number: Go to step 9.
F
Finish storing numbers in this group: No. And go to step 12.
12. Now you can either: GROUP t 1-7/N
PRINT LIST j/SEARCH k
F
Start working on another Group. Go
to step 2.
F
Return to standby mode by pressing
Function.
Editing and Erasing the Group
This procedure deletes or edits this Group and all the numbers stored in it. The
Speed Dial Codes and Quick Dial Keys that you used in this Group will not be
deleted from the memory; you can continue to use them for other purposes.
BEFORE YOU SEND YOUR FIRST FAX
50