Ricoh 2400L - Manual (Page 760)

7. Either:
❐ Edit the Confidential ID stored with
this code; press Yes then input the
ID.
When the ID is correct, press Yes.
8. Either:
❐ Enter or edit another code: Go to
step 2.
❐ Finish: Function.
Switching Restricted Access On
Restricted Access allows you to keep a closer track of machine usage, and
deters passers-by from casually using your machine.
If this feature is switched on, users have to enter their Personal Code before they
can use the machine. The Personal Code must have already been stored in the
machine.
However, the user can enter codes directly at the keypad. Therefore, if you are
serious about using this feature to stop casual users from operating the machine,
you must allocate relatively obscure codes to all authorized users, and try to
avoid obvious numbers such as 0001.
To switch Restricted Access On or Off, do the following:
If you wish to switch Restricted Access on or off, do the following procedure.
(See page 184 if you need more information about the User Parameter Settings
adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes. SETTING? Y/ j
PRINT LIST j
2. Yes. KPAD/Y/ j k
SWITCH 00 :0000 0000
3. The settings for switch 00 are now
shown on the bottom line of the display.
4. Press
k
until the settings for switch05 are
shown. The setting that you need to
change is digit 4.
SWITCH 05 : 0000 0000
Digit 4 (Underlined)
Digit Purpose
4 Restricted Access 0:Off 1: On
5. If you wish to change the setting, press 4 on the ten key pad.
6. Finish: Yes and Function.
CONFID
,
L ID KPAD
tttt
A
D
V
A
N
C
E
D
F
E
A
T
U
R
E
S
ADVANCED FEATURES TRANSMISSION
69