Ricoh 2400L - Manual (Page 615)

Problem Action Required
Frequent original misfeeds Multifeeds
Incorrect positioning of originals
➡ Put the document in the feeder correctly.
See page 18.
Incorrect alignment of originals
➡ Align the edges of the document. See page 18.
Curled pages
➡ Flatten the document. See page 15.
Incorrect document type
➡ Use a proper document type. See page 15.
Mixed document types
➡ The pages must all be of the same type.
Static electricity on the originals
➡ Shuffle the document. See page 18.
User maintenance is needed
➡ Do user maintenance, especially roller [A].
See page 139.
The document feeder is not adjusted correctly.
➡ Adjust the auto document feeder.
See page 151.
Non-feeds
Copier silicone oil on the originals
➡ Wait a few minutes, then try again.
Incorrect alignment of originals
➡ Align the edges of the document. See page 18.
Curled pages
➡ Flatten the document. See page 15.
Incorrect document type
➡ Use a proper document type. See page 15.
More than 30 pages in the feeder
➡ Do not place more than 30 pages in the
automatic document feeder at once.
User maintenance is needed
➡ Do user maintenance, especially rollers [A]
and [E]. See page 139.
The document feeder is not adjusted correctly.
➡ Adjust the auto document feeder.
See page 151.
SOL
V
IN
G
PROB
LE
MS
SOLVING PROBLEMS OPERATING DIFFICULTIES
159