Ricoh 2400L - Manual (Page 519)

Program the Tone Key
1. Function 3 1 and Yes. n t QUICK/j k
PRINT LISTj/SEARCHk
2. Press the Quick Dial key 31. n 31 PROGRAM? Y/j k
3. Yes. n 31 Y/N
PROGRAM TONE KEY?
4. Yes. The Quick Dial key 31 is pro-
grammed as the Tone key.
Operating the Tone Key
1. Make sure that the machine is in standby mode, and that there is no document
in the feeder.
2. Pick up the telephone handset, or press On Hook Dial.
3. Dial the remote facility. Do not press Start.
4. After your line is connected to the remote facility, do the following:
❐ If your telephone line type is DTMF (Tone Dial): Go to step 5.
❐ If your telephone line type is Pulse Dial: Press Quick Dial key 31. A dot ap-
pears on the display.
5. Input the digits that you need to use the remote facility. These digits will depend
on the remote facility.
NOTE: Do not press Start.
6. After you have finished your business with the remote facility, hang up.
Cross-reference
Tone Dial (Telephone Line Type): see page 192.
AD
V
A
N
C
E
D
FE
A
T
U
R
E
S
ADVANCED FEATURES TRANSMISSION
63