Ricoh 2400L - Manual (Page 313)

Storing a Keystroke Program
1. Make sure that the machine is in standby
mode (see page 60).
READY 100% 10:00
SET DOC. OR DIAL NO.
2. Place a sheet of paper in the feeder.
F Skip step 2 if you are making a Polling
Reception program. TRANSMIT OPTIONk
DIAL FAX NUMBER
3. Select all required features (such as
Transfer Request) and telephone num-
bers as you would normally do.
F
Contrast, resolution, and halftone cannot
be stored in a keystroke program.
4. Press the Quick Dial key that you wish to
store the program in.
Example: 01 of the Quick Dial
PROGRAM Y/N
PROGRAM?
F Make sure that this key is vacant.
5. To complete the program: Yes
Note:The procedure that you just stored will now begin. If you do not wish to use
the procedure now, press Stop immediately.
A
D
V
A
N
C
E
D
F
E
A
T
U
R
E
S
ADVANCED FEATURES TRANSMISSION
97