Storing the id code – Ricoh 2400L User Manual
Page 743
Storing the ID Code
Before programming the ID Code, confer with other users in your fax network to
agree on an ID Code. This is because communications using ID Codes will fail if
the codes are not the same.
The ID Code can be any four-digit code (using digits 0 to 9 and letters A to F),
except 0000 and FFFF.
In addition to the networking features described in this section, ID Codes are
used with the following communication features. The same code must be used by
all members of your fax network and all people you wish to communicate with
using these features.
❐
Calling to Request a Message (Polling): see page 116.
❐
Closed Network: see pages 75 and 112.
Features using ID Codes can only be used between terminals made by the same
maker.
TRANSMISSION
ADVANCED FEATURES
52