Ricoh 2400L - Manual (Page 798)

Printing a Center Mark
If you switch this feature on, a mark is printed halfway down each received page
on the left hand side. This makes it easy for you to position the hole puncher
correctly when you file away the received fax messages.
The center mark is not printed when you use the machine for making copies.
To switch this feature on, do the following. (See page 184 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.







2. Press Yes. The settings for switch 00 are
now shown on the bottom line of the
display.
 



    
3. Press


until the settings for switch 02
are shown.
The setting that you need to change is
digit 1 (Double underlined).
 



    

 
  
Digit 1(Double underlined)
0: The center mark will not be
printed
1: The center mark will be printed
4. If you wish to change the setting,
press 1 on the ten key pad.
5. Finish: Yes and Function.
AD
V
A
NCED
FEA
T
URES
ADVANCED FEATURES RECEPTION
107