Ricoh 2400L - Manual (Page 501)

Before you can start to set up transfer request, there are some items that you
have to program in your machine. These are as follows.
❐ Your Fax Machine’s Own Telephone Number
❐ The ID Code
Storing your Machine’s Own Telephone Number
Store your fax terminal’s telephone number using this feature. If you do not do
this, you will not be able to use the Transfer Request feature.
If your fax machine’s telephone number changes, do not forget to change the
stored telephone number data.
1. Function 6 2 2 2 2 6 1. INITIAL MODE Y/NEXTk
61 INITIAL SET
2. Yes. Make sure that the opposite display
appears, then press Yes.
Y/NEXTk
SET OWN NUMBER
3. Input your fax terminal’s telephone num-
ber.
OWN NO. KPAD/Y/N
0111212-5551234t t t t t
❐ The format of the number must be
as follows:
International Dial Prefix, Your Country
Code, Your Area Code, then you
must add a Pause, followed by your
telephone number.
Check the International Dialing Prefix
and the Country Code with your local
telecommunications operator. The ex-
ample shown is for the USA; the
codes to add are 011 and 1.
NOTE: Use the Pause key to add a pause.
4. Yes and Function.
AD
V
A
N
C
E
D
FE
A
T
U
R
E
S
ADVANCED FEATURES TRANSMISSION
45