Ricoh 2400L - Manual (Page 310)

Programming the ID code
To store an ID Code, do the following.
1. Function 6 2 2 2 2 6 1 and Yes. Y/NEXTk
SET OWN NUMBER
2. Press
k
until the opposite display appears. Y/NEXTk
SET POLLING ID
3. Yes. POLLING ID KPAD
t t t t
4. Input the ID Code that you will be using.
Example: 4 3 6 3
POLLING ID Y/N
4363
F
Do not use 0000 or FFFF.
5. Yes and Function.
Editing the ID Code
If you want to change the ID code, do the following.
1. Function 6 2 2 2 2 6 1 and Yes. Y/NEXTk
SET OWN NUMBER
2. Press
k
until the opposite display appears. Y/NEXTk
SET POLLING ID
3. Yes. POLL. ID CHANGE? Y/N
1234
4. Yes and No. POLLING ID KPAD
t t t t
5. Input a new ID.
Example: 5433
POLLING ID Y/N
5433
6. Yes and Function.
Making a Transfer Request
After you stored your Machine’s Own Telephone Number and ID code you can do
the transfer request as in the following procedure.
1. Make sure that the machine is in standby mode (see page 60).
2. Place your document in the feeder. TRANSMIT OPTIONk
DIAL FAX NUMBER
TRANSFER REQUEST ADVANCED FEATURES
94