Ricoh 2400L - Manual (Page 285)

Home Position Setting Adjustments
For the contrast, resolution, and halftone, you can select whether the settings
return to home position at the end of transmission (in a new machine, they do).
Also, you can change the home positions of these settings.
If you need other adjustments, contact a service representative.
The procedure is as follows (see page 11 if you need more information about the
User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes SETTING? Y/j
PRINT LIST j
p
At this time, you can print a User
Parameter List if you press
j and Start.
.
2. Yes. KPAD/Y/j k
SWITCH 00 : 0000 0000
3. The settings for switch 00 are now
shown on the bottom line of the display.
SWITCH00:0000 0000
Digit 7 6 5 4 3 2 1 0
The digits are numbered from 7 to 0;
the setting of digit 7 is shown at the left
side of the display and digit 0 is at the
right.
The settings that you may need to change are those for digits 0, 1, 2, 3, 4, 5,
6, and 7. The functions of these are as follows.
Digit Purpose
0 Stamp 0: Off* 1: On
1
2
3
Contrast home position
Digit 3 Digit 2 Digit 1 Setting Digit 3 Digit 2 Digit 1 Setting
0 0 0 Normal* 1 X X Do not use
0 0 1 Lighten
this setting
0 1 0 Darken
4
5
Resolution home position
Digit 5 Digit 4 Setting Digit 5 Digit 4 Setting
0 0 Standard* 1 0 Fine
0 1 Detail 1 1 Do not change these
settings.
6
Tramsmission mode home position
0: Memory transmission*
1: Immediate transmission
7 Halftone on/off home position 0: Off* 1: On
ROUTI
N
E
OPE
R
A
T
ION
ROUTINE OPERATION SENDING A FAX MESSAGE
69