Ricoh 2400L - Manual (Page 556)

3. Press
k
until the settings for switch 10 are
shown.
KPAD/Y/j k
SWITCH 10 : 0000 0000
The setting that you need to change is
digit 1 (double underlined).
SWITCH10 : 0000 0010
Digit 1 (Double underlined)
0: Two in One is disabled.
1: Two in One is enabled.
4. If you wish to change the setting, press 1
on the ten keypad.
5. Finish: Yes and Function.
Closed Network (Reception)
This feature may help you to prevent reception of excessive junk fax mail.
The ID Codes of the communicating machines are checked. If they are not the
same, the communication is stopped.
NOTE: This feature may not be reliable if you are communicating with a terminal
produced by a different manufacturer.
If you are interested in this feature, contact your service representative.
Cross-references
ID Codes: see page 46.
RECEPTION ADVANCED FEATURES
100