Ricoh 2400L - Manual (Page 713)

Sending to More Than One Location (Broadcasting)
1. Make sure that the machine is in standby mode (see page 20).
2. Make sure that the Memory indicator is lit. If it is not, press Memory.
3. Place your fax message face down into the feeder.
❐
You can dial without placing the message in
the feeder first. Place the document after
you dial the number and go to step 5.

 



   

4. Dial in one of the following ways.

 




a) Ten Key Pad b) Quick Dial c) Speed Dial d) Group Dial ✬
Example: Group 1. stored in
Quick Dial Key 08
08 of the Quick Dial Key
✬ Method: Press the Quick Dial Key the Group is stored in (in the example, press key 08).
Selecting Contrast and Resolution: See page 26.
Options for Sending a Message: See page 32.
12 13
Example: Quick Dial 12
SENDING A FAX MESSAGE ROUTINE OPERATION
22