Ricoh 2400L - Manual (Page 898)

❐ To enter the RTI from the standby
mode, press Function 6 2 2 2 2 6
1 and Yes. And then press

until the
screen is as shown opposite. Then
press Yes.
❐ If you have just enter the RTI in the
previous procedure, press Yes.
2. Either:
❐ If no TTI has been stored, input the
TTI using the Quick Dial keys and the
ten key pad. 
 
❐ If a TTI has already been stored,
and/or you do not wish to edit: No
and go to step 4. 
 " 
 ! 

❐ To change or enter the TTI, press
Yes, then edit your TTI
Example: XYZ HEAD OFFICE
Note: You may use up to 32 charac-
ters.
For how to program characters, see
page 182.

 " 
 ! 

To edit the TTI "


",
for example, move the cursor below H
using



and

. Press Clear four times
and input NY.

  
 ! 

3. Press Yes to enter the TTI.
4. You may wish to enter the CSI next.
Either;
❐ Go to step 1 in the following
procedure of CSI programming.
❐ Press Function to return to the
standby mode.
CSI (Called Subscriber Identification)
Your CSI appears on the other party’s operation panel during communication
instead of your RTI, if the other party’s machine is another manufacturer’s
product. The CSI can have up to 20 characters (only numbers and spaces can
be used). Enter your fax machine’s telephone number, because some features of
your machine may not work if the CSI is not the same as the telephone number.
I
NIT
IAL
SET
TI
NGS
APPENDIX SOME ITEMS MUST BE PROGRAMMED FIRST
207