Ricoh 2400L - Manual (Page 781)

Cross-references: RTI and CSI: see page 205.
Journal: see page 137. Wild Cards: see page 102.
Switching Authorized Reception On/Off
Before you use Authorized Reception, you have to switch it on using Function 62.
If it is switched off, the machine will accept any incoming fax message.
1. Function 6 2 2 2 2 6 2 and Yes. 

 
 
2. Scroll through the list of features with


until the screen is as shown opposite.


  
3. Yes.
  



4. Change the on/off setting by pressing

or


.
5. Finish: Yes and Function.
Programming the List of the Senders for Authorized Reception
A terminal sending an incoming messages always identifies itself to your
terminal. The identification consists of an RTI code or a CSI code. When you
specify the senders for memory lock, you must program a list of these codes.
Program the list by Function 81 called "Special Terminals" (See page 113).
Selecting Whether to Accept or Reject Messages from Special Terminals
You can select one of the following two things.
❐ Only accept messages from Special Terminals (i.e. reject all others).
❐ Accept incoming messages except those from the Specified Terminals (i.e.
reject Special Terminals).
1. Function 6 2 2 2 2 6 3 and Yes.   

  
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
 

 
   
RECEPTION ADVANCED FEATURES
90