Ricoh 2400L - Manual (Page 658)

❐ If you do not wish to program a label:
Press No and go to step 9.
7. Input a label using the Quick Dial keys
and the ten keypad (such as DISTRIBU-
TORS).
GROUP 1 ABC /Y/N
DISTRIBUTORSt t t t t t t t
8. Yes. GROUP 1 DIAL/N
t t t t t t t t t t t t t t t t t t t t
9. Input the number that you wish to store in
the group. For example:
❐ Quick Dial 25: Press the 25 on the
ten keypad. GROUP 1 Y/N
n 25
❐ Speed Dial 00: Speed Dial key
and then 0 and 0 from the ten key-
pad. GROUP 1 Y/N
N 00
❐ Full number: Input it at the keypad
on the operation panel. GROUP 1 Y/N
00144215842261
10. Yes.
If " ALREADY PROGRAMMED " appears,
either;
GROUP 1 DIAL/N
t t t t t t t t t t t t t t t t t t t t
❐ Keep the number: No.
❐ Erase the number : Yes.
NOTE: Do not store more than 132 numbers in a Group.
11. Either:
❐ Input another number: Go to step 9.
❐ Finish storing numbers in this group:
No. And go to step 12.
12. Now you can either:
❐ Start working on another Group.
Go to step 2. GROUP t 1-7/N
PRINT LIST j/SEARCH k
❐ Return to standby mode by pressing
Function.
Editing and Erasing the Group
This procedure deletes or edits this Group and all the numbers stored in it. The
Speed Dial Codes and Quick Dial keys that you used in this Group will not be
deleted from the memory; you can continue to use them for other purposes.
1. Function 3 3 and Yes. GROUP t 1-7/N
PRINT LIST j/SEARCH k
INITIAL SETTINGS APPENDIX
202