Ricoh 2400L - Manual (Page 566)

Stored ID Override Option
This procedure overrides the ID Code that is stored in your machine. The override
is effective for this operation only.
If OPTION k
is displayed:
1. Press
k
until the screen is as shown oppo-
site.
SET OPTION Y/k
SET POLLING ID?
2. Yes. SET OPTION KPAD
ID:t t t t
3. Enter the ID code that you wish to use for
this operation.
Example: 2 5 6 7 from the ten keypad.
SET OPTION Y/N
ID:2567
4. Yes. POLLING RECV OPTIONk
DIAL FAX NUMBER
5. Dial and press Start.
For how to use other options, such as Send Later
for delayed polling, see page 108 and the pages following that.
NOTE: In theory, you can poll up to 132 different destinations using the above
procedure. However, this number depends on how many numbers are
currently waiting in memory to be dialed. See the table on page 205
for more information concerning the limitations of this feature.
Continuous Polling Reception
If you wish to poll a number of destinations in a continuous cycle, switch this
feature on. After the machine has polled all the specified destinations, it will start
again from the first destination.
To switch on continuous polling reception, contact a service technician.
OTHER ADVANCED FEATURES
110