Ricoh 2400L - Manual (Page 386)

RDS (Remote Diagnostic System)
Overview
If your machine has a problem, a service technician can perform various
diagnostic tasks over the telephone line from the service station to try to find out
what is wrong with your machine. The service technician can also use RDS to
change some of your machine’s settings if you request it.
For RDS to work, you must switch it on before the service technician starts the
RDS operation on your machine.
For some RDS operations, it may be necessary for you to stay near the machine.
Switching RDS On/Off
Before your machine can accept incoming calls from an RDS, you have to switch
RDS on using Function 62. If it is switched off, the machine will not accept
treatment from an RDS.
1. Function 6 2 2 2 2 6 2 and Yes. Y/NEXTk
SELECT LINE
2. Scroll through the list of features with
j
and
k
until the screen is as shown oppo-
site.
Y/NEXTk
RDS ON/OFF
3. Yes. RDS Y/j k
ON kOFF
4. Change the on/off setting by pressing
j
or
k
.
5. Finish: Yes and Function
Note: RDS is automatically switched off 24 hours after you switch it on.
OTHER ADVANCED FEATURES
170