Ricoh 2400L User Manual
Page 909
❐
There are 7 groups, from 1 to 7.
Example: Group: 1
Enter 1 from the ten key pad and Yes.
❐
If this group already exists, go to step 4.
❐
If you input the wrong group
number, press No.
3. Either:
❐
If you do not want to program this
group into a Quick Dial key, No and
go to step 6.
❐
If you want to program this group into
a Quick Dial key, Yes.
4. Press the Quick Dial Key in which you
wish to store this new group.
Example: Quick Dial key 08.
&
❐
If you pressed the wrong key: No.
5. Yes.
6. Either:
❐
If you want to program a label for this
Group: Press Yes and go to step 7.
❐
If you do not wish to program the
label: Press No and go to step 9.
7. Input a label using the Quick Dial keys and
the ten key pad (such as DISTRIBU-
TORS).
8. Yes.
9. Input the number that you wish to store in
the group. For example:
❐
Quick Dial 25: Press the 25 of the
ten key pad.
❐
Speed Dial 00: Speed Dial key and
then 0 and 0 from the ten key pad.
❐
Full number: Input at the keypad on
the operation panel.
& '
QUICK DIAL, SPEED DIAL, AND GROUP DIAL
APPENDIX
218