Ricoh 2400L - Manual (Page 353)

6. Either:
-Edit the RTI/CSI and press Yes. Then
go to step 7.
- To delete the RTI/CSI: No and Yes.
Then go to step 5.
RTI/CSI Y/N
STORE AS WILD CARD?
Caution: If you delete all the RTIs and CSIs for a forwarding station, you
must also delete the forwarding station (see step 3). If you do not
do this, all incoming messages will be forwarded to that station.
7. To store it as a wild card: Yes.
Otherwise: No.
FORWARD Y/N
SET RTI/CSI?
8. Either;
- Edit or input another RTI/CSI for this
forwarding station: Press Yes and Go to
step 3.
- To work on another forwarding station:
press No. Go to step 2.
- Finish: Function.
Note: If you switch the forwarding on and program no RTI/CSI, all incoming
messages are forwarded.
Selecting which messages to forward
You have to select one of the following two things.
F
Forward all incoming messages from specified senders.
or
F
Forward all incoming messages except those from specified senders.
1. Function 6 2 2 2 2 6 3 and Yes. SETTING? Y/j
PRINT LISTj
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
KPAD/Y/j k
SWITCH 00 : 0000 0000
3. Press
k
until the settings for switch 08 are
shown.
The settings that you need to change
are digit 6 (double underline) and 7 (sin-
gle underline).
SWITCH :08 0000 0000
ADV
ANCED
FEA
T
UR
E
S
ADVANCED FEATURES RECEPTION
137