Ricoh 2400L - Manual (Page 492)

Using the AI Redial Key
The machine remembers the last 10 telephone number that you input. If you have
to redial one of these numbers, just press the AI Redial key, until the required
telephone number or name is displayed, then press the Start key.
This feature has the following uses:
❐ If the machine is waiting to redial the other party, you do not have to wait for the
redialing interval to expire. Press AI Redial until the required telephone
number or name is displayed, then press Start.
❐ If you wish to send another message to the same address that you sent one to
recently, you don’t have to dial the full number again if it is still in the Redial
memory. Place the message in the feeder, then press Start.
NOTE: The AI Redial key employs the AI Short Protocol feature.
1. Follow both steps in any order.
❐ Press the Pause/AI Redial key un-
til the required number appears in
the display, then press the Yes key
twice. REDIAL Y/j k
n 08 ATLANTA OFFICE
❐ Carefully place your fax message
into the auto document feeder. TRANSMIT OPTIONk
DIAL FAX NUMBER
2. Either:
❐ Select another number. (Broadcast-
ing)
❐ Start the transmission: Press the
Start.
SENDING A FAX MESSAGE ROUTINE OPERATION
36