Ricoh 2400L - Manual (Page 779)

Rejection of Messages from Unidentified Senders
If you wish, you can make the machine reject incoming messages that require
storage to your machine’s memory, if they are not accompanied with an identifier
such as the RTI or CSI. Features that would be affected are Substitute
Reception, Memory Lock, and Confidential Reception, Forwarding, and Action as
a Transfer Station.
The procedure is as follows (see page 184 if you need more information about
the User Parameter Settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
At this time, you can print a User Pa-
rameter List if you press

and Start.
 
  
2. Press Yes. The settings for switch 00
are now shown on the bottom line of
the display.



 ## $#### ####
3. Press


until the settings for switch 05
are shown.
The setting that you need to change is
that for digit 1.




Digit 1 (Double Underlined)
0: Messages are not rejected.
1: Messages are rejected.
4. If you wish to change the setting, press
1 on the ten key pad.
5. Finish: Yes and Function.
Cross-references:
Receiving Fax Messages When There Is a Problem (Substitute Reception): see page 44
Receiving Confidential Messages:
see page 80
Lock Incoming Messages (Memory Lock): see page 84
Forwarding: see page 92
RECEPTION ADVANCED FEATURES
88