Ricoh 2400L - Manual (Page 742)

Cross-reference:
Quick Dial and Speed Dial: see pages 209 and 211. Groups: see page 210.
ID Code: see page 52.
Before you can start to set up transfer request, there are some items that you
have to program in your machine. These are as follows.
❐ Your Fax Machine’s Own Telephone Number
❐ The ID Code
Storing your Machine’s Own Telephone Number
Store your fax terminal’s telephone number using this feature. If you do not do
this, you will not be able to use the Transfer Request feature.
If your fax machine’s telephone number changes, do not forget to change the
stored telephone number data.
1. Function 6 2 2 2 2 6 1.


 






 

2. Yes. Make sure that the opposite display
appears, then press Yes.




  

3. Input your fax terminal’s telephone num-
ber.
   

❐ The format of the number must be as follows:
International Dial Prefix, Your Country Code, Your Area Code, then you
must add a Pause, followed by your telephone number.
Check the International Dialing Prefix and the Country Code with your lo-
cal telecommunications operator. The example shown is for the USA; the
codes to add are 011 and 1.
Note: Use the Pause key to add a pause.
4. Yes and Function.
AD
V
A
NCED
FEA
T
URES
ADVANCED FEATURES TRANSMISSION
51