Ricoh 2400L - Manual (Page 27)

Sending to Just One Location
1. Make sure that the machine is in standby
mode:
The display on the operation panel must
be as shown on the right.
READY 100% 10:00AM
SET DOC. OR DIAL NO.
2. Carefully place your fax message face
down into the auto document feeder.
TRANSMIT OPTIONk
DIAL FAX NUMBER
NOTE: You can dial without placing the
message in the feeder first.
Place the document after you
dial the number and go to step 4.
❐ The pages must be placed face down in the
feeder, with the first page at the bottom of the
stack.
❐ Feed the pages in so that the top edge goes in first.
❐ Do not feed in more than 30 pages.
❐ Do not use unsuitable types of original (see pages
14 and 15).
❐ Adjust the document guides to fit the width of the
pages.
Selecting Contrast and Resolution: See page 23.
Options for Sending a Message: See page 27.
❐ Do not use pages of different sizes.
❐ The pages should be arranged loosely, but
the leading edges should be tidy, as shown
above.
GOOD
BAD
SENDING A FAX MESSAGE ROUTINE OPERATION
18