Ricoh 2400L - Manual (Page 711)

Sending to Just One Location
1. Make sure that the machine is in standby
mode:
The display on the operation panel
must be as shown on the right.

  


 
 
2. Carefully place your fax message face
down into the auto document feeder.

 



   

Note: You can dial without placing the
message in the feeder first.
Place the document after you
dial the number and go to step 4.
❐ The pages must be placed face down in the
feeder, with the first page at the bottom of the
stack.
❐ Feed the pages in so that the top edge goes in
first.
❐ Do not feed in more than 30 pages.
❐ Do not use unsuitable types of original (see
pages 15 and 16).
❐ Adjust the document guides to fit the width of
the pages.
Selecting Contrast and Resolution: See page 26.
Options for Sending a Message: See page 32.
❐ Do not use pages of different sizes.
❐ The pages should be arranged loosely,
but the leading edges should be tidy, as
shown above.
SENDING A FAX MESSAGE ROUTINE OPERATION
20