Ricoh 2400L - Manual (Page 813)

Stored ID Override Option
This procedure overrides the ID Code that is stored in your machine. The
override is effective for this operation only.
If OPTION


is displayed:
1. Press


until the screen is as shown op-
posite.



  



  
2. Yes. 


  

 
3. Enter the password that you wish to use
for this operation.
Example: 2 5 6 7 from the ten key pad



  
 
4. Yes.
 

 


 
5. Dial and press Start.
For how to use other options, such as Send Later
for delayed polling, see page 120 and the pages following that.
Note: In theory, you can poll up to 132 different destinations using the above
procedure. However, this number depends on how many numbers are
currently waiting in memory to be dialed. See the table on page 221 for
more information concerning the limitations to this feature.
Continuous Polling Reception
If you wish to poll a number of destination in a continuous cycle, switch this
feature on. After the machine has polled all the specified destinations, it will start
again from the first destination.
To switch on continuous polling reception, contact a service technician.
OTHER ADVANCED FEATURES
122