Ricoh 2400L - Manual (Page 428)

DISPLAYED ERROR MESSAGES
The following messages may appear while you are operating or programming the
machine.
CHECK AUT O- DI AL I NG
You cannot use the auto-dialer at the moment. Use the ten-key
pad or the handset.
NO F I L E EXI ST S
No polling reception operations have been programmed.
There are no messages in memory waiting for transmission.
There are no messages in memory waiting to be polled.
Incorrect file number. Check the file number and try again.
T OO MANY DEST .
The memory cannot hold any more telephone numbers.
Either: Delete some numbers then try again.
Or: Wait until some of the Send Later or other delayed
transmissions waiting in memory have been carried out, then
try again.
USED AS GROUP This Quick Dial Key has a Group stored in it.
USED AS PROGRAM This Quick Dial Key has a Keystroke Program stored in it.
USED AS DI AL This Quick Dial Key has a telephone number stored in it.
USED AS AUT O DOC. This Quick Dial Key has a Auto Document
USED AS T ONE KEY This Quick Dial Key is programmed as Tone Key.
USED AS GROUP KEY This Quick Dial Key is programmed as Group Key
NOT PROGRAMMED
Either:
This Quick Dial Key or Speed Dial Code does not contain a
number.
This Quick Dial Key does not contain a Keystroke Program.
AL READY PROGRAMMED
Either:
This number is already included in this Group.
This RTI/CSI has already been stored for use with this feature.
PL EASE SET PAUSE
You must add a pause after your area code when you input
your fax terminal’s own telephone number.
ADD T ONER The toner cartridge is empty. Install a new cartridge.
CL EAR ORI GI NAL A document is jammed in the feeder.
CL EAR COPY Paper is jammed in the printer.
CL OSE COVER A cover is not closed properly. Check that all covers are closed.
UNABL E USE PRI NT ER
Machine cannot print a list/file, because the heater is not warm
enough or plotter is not ready.
SERVI CE CAL L J - JJ H Machine is out of order. Contact your service representative.
DISPLAYED ERROR MESSAGES SOLVING PROBLEMS
212