Ricoh 2400L - Manual (Page 809)

Note: If you see ALREADY INPUT,you already have a message on Free Polling
Standby.
❐ To clear the old message: Clear the old polling transmission file by
Function 23 ( See page 123). And start from the step 1 again.
Secured Polling
1. Place your document in the feeder.



 


 
2. Function 1 4 and Yes.





 


Note: If you have not yet stored an ID Code using Function 61, you will be
asked to enter an ID Code. Proceed in the same way as for step 4 in
"Stored ID Override" on the next page.
3. Start.
❐ Your fax message is stored and
held on polling standby.
Note: If you see    

you already have a message on Secured
Polling Standby.
❐ To erase the old message: Clear the old polling transmission file by
Function 23 ( See page 123).
❐ To keep the old message: Input an ID code in the same way as for
step 3 in "Stored ID Override" below.
Stored ID Override
This procedure will override the ID Code stored in your machine. The override is
only effective for this one transmission.
1. Place your document in the feeder.



 


 
2. Function 1 4 and Yes.





 


3. Press


until the screen is as shown oppo-
site.



  



  
4. Yes. 


  

 
OTHER ADVANCED FEATURES
118