Ricoh 2400L - Manual (Page 345)

Rejection of Messages from Unidentified Senders
If you wish, you can make the machine reject incoming messages that require
storage to your machine’s memory, if they are not accompanied with an identifier
such as the RTI or CSI. Features that would be affected are Substitute Reception,
Memory Lock, and Confidential Reception, Forwarding, and Action as a Transfer
Station.
The procedure is as follows (see page 11 if you need more information about the
User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
At this time, you can print a User Pa-
rameter List if you press
j
and Start.
SETTING? Y/j
PRINT LIST j
2. Press Yes. The settings for switch 00
are now shown on the bottom line of the
display.
KPAD/Y/j k
SWITCH 00 :0000 0000
3. Press
k
until the settings for switch 05 are
shown.
The setting that you need to change is
that for digit 1.
SWITCH 05 : 0000 0000
Digit 1 (Double Underlined)
0: Messages are not rejected.
1: Messages are rejected.
4. If you wish to change the setting, press 1
on the ten key pad.
5. Finish: Yes and Function.
Cross-references
Substitute Reception: see page 83.
Confidential Reception: see page 121.
Memory Lock: see page 125. Forwarding: see page 133.
ADV
ANC
E
D
FE
A
T
URES
ADVANCED FEATURES RECEPTION
129