Ricoh 2400L - Manual (Page 96)

Reverse Order Printing (Feature Expander Required)
Normally, the machine prints the pages of received messages in the order that
they were received uncollated.
However, with Reverse Order Printing, the machine will collate the sequence by
printing the message from the last page first collated. This will make it easier to
distribute the received fax messages, and more convenient for reading them.
Reverse Order Printing will not take place unless you switch it on beforehand.
To switch this feature on or off, do the following procedure. (See page 156 if you
need more information about the User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes. SETTING? Y/j
PRINT LIST j
2. Yes. The settings for switch 00 are now
shown on the bottom line of the display.
KPAD/Y/j k
SWITCH 00 : 0000 0000
3. Press
k
until the settings for switch 10 are
shown.
KPAD/Y/j k
SWITCH 10 : 0000 0000
4. The setting that you need to change is
digit 0 (double underlined).
SWITCH 10 :0000 0001
Digit 0 (Double underlined)
0: This feature is Off.
1: This feature is On.
5. If you wish to change the setting, press 0
on the ten keypad.
6. Finish: Yes and Function.
AD
V
A
N
C
E
D
FE
A
T
U
R
E
S
ADVANCED FEATURES RECEPTION
87